Ball valve with half union for pump, check valve, and seal 1"x1 1/2" F-F
The 1" ball valve with union for 6/4" pump, gasket and integrated check valve is a dedicated component for domestic water installations, designed to protect and control the operation of circulation and booster pumps. It combines shut-off, connection and backflow protection in one compact fitting.
The valve features a G1 union nut tailored to standard pumps and a built-in check valve that safeguards the pump against reverse flow, with the option of manual opening when service or draining is required. Nominal pressure up to 10 bar and a maximum working temperature of 110°C suit typical cold and hot water systems, while the butterfly handle supports precise and quick operation.
The durable body and ball made of CW617N brass resist corrosion and mechanical wear, and PTFE seals on the ball and stem maintain tightness over long-term use. Nickel-free internal surfaces benefit drinking water applications, and the gland design facilitates reliable sealing during installation and later adjustments.
This 1" brass ball valve for water installations is a practical alternative to a standard DN25 ball valve, offering pump-ready connection and integrated backflow protection for installers who value reliability and straightforward assembly.
- Additional features:
- • equipped with a check valve which is designed to prevent gravity circulation <br />• with 1 1/2" half-union for pump
- Included In Kit:
- gasket
- Nominal pressure [bar]:
- 10
- Maximum operating temperature [°C]:
- 110
- Ball valve ball material :
- brass
- Type of holder:
- butterfly
- Connection type:
- screw out-screw out with a half union
- Gland:
- yes
- NICKEL FREE:
- yes
- Filter type:
- N/A
- Type of connection for multi-layer pipes:
- N/A
- Rosette diameter [mm]:
- N/A
- For multi-layer pipes:
- no
- Drain nozzle:
- no
- Suction strainer:
- no
- Air vent:
- no
- Full bore:
- no
- Rosette included:
- no
- Built-in filter:
- no
- Barcode:
- *W in packaging with a bar code for retail sale *E product on Euro hanger with bar code for retail sale
- Ball sealing material :
- PTFE
- Material of stem seal:
- PTFE and FP
- Body material/assembly material:
- brass
- Media:
- water